New Silk’n FaceTite Z Version 3.0 三源塑顏射頻機 Z(連一支專用凝膠)


我們自豪地介绍全新的Silk’n FaceTite Z 3.0!

FaceTite Z 3.0除了擁有其前身的核心功能和技术, 并添加了无线供电。

FaceTite Z 3.0 可以同时有线或无线使用。 Silk’n 技术的进步使功效得以全面更好的发挥,在无线模式作業下, 用家能更方便无拘无束地护肤,轻松地修复皮肤, 恢复皮肤年轻化和活力, 達至容光焕发的功效。同时,与前代电池相比,我们先进的电池技术为缩短处理时间而提供了卓越的能量。

刷新功效和性能,FaceTite Z 3.0设备的備受歡迎关键功能是:


SKU: SAFAC-ISR3 分类: , 标签:


重量 2000 克
尺寸 20.5 × 20 × 12.5 厘米


Cordless Mode

No more hassle with cables and adaptors during your treatment? Try the Silk’n FaceTite Z Version3.0! The cordless function offers you much more freedom to move. This means you are no longer bound to one place and you can treat your face wherever and whenever you want. Watching TV, in bed or perhaps while you’re relaxing in the garden.

Skin rejuvenation
with HT™ technology

  • How does Silk’n FaceTite work? – 1:25
  • Skin expert Debbie Thomas
    Skin expert Debbie Thomas – 2:15
  • Before and after photos
    Before and after photos – 1:59


How to use your FaceTite Z Version 3.0

Silk’n FaceTite Z is easy to use. A treatment takes only a few minutes of your time. Be sure to follow our treatment play to get the best results.

New to using the Silk’n FaceTite? Here’s what we recommend.

Treatment schedule

  • Treat each area separately for 5 to 10 minutes ( 10 to 15 minutes for corded FaceTite V2).
  • You can treat as many areas as you like in one session; it’s up to you.

Maintenance regime

  • To maintain your results, you should use FaceTite for two sessions a week for 10 weeks.
  • After that, treat once every two weeks to maintain results.

Using the device

Follow the recommended order in the user guide and treat each zone for 5 to 10 mins by holding the device against your skin. It is important that you treat each area individually, one small area of your face at a time. By doing this, the temperature on your skin remains constant. Don’t forget to include your neck and jawline in the treatment.

Silk’n Slider Gel

Silk’n FaceTite comes with a tube of Silk’n Slider Gel. This gel is required to carry out your treatments. It is important that you apply a thin layer of gel to your skin before you start treatment.

Without the gel, the device will not work. The water-based product not only moisturizes but also helps to guide the device. It ensures that Silk’n FaceTite moves easily over your skin and prevents it from overheating and reddening.

You can consider to add on more Slider Gel to your shopping cart when you order the FaceTite.

Wrinkle and skin treatment areas

  1. Forehead (including in between brows)
  2. Right Cheek (including around eyes)
  3. Left Cheek (including around the eyes)
  4. Right Lower Cheek (including nasolabial fold, or, laugh lines around the mouth, and jawline)
  5. Left Lower Cheek (including nasolabial fold and jawline)
  6. Neck – Treat here for smoothing

Anti-aging treatment steps

  1. Remove all jewelry.
  2. Press the start button to turn on the device. The level 1 energy level indicator light will go on.
  3. For your first treatment, start at energy level 1 for a few minutes, then set an energy level that is comfortable for the area you wish to treat. For future treatments, you can use an energy level that is comfortable for the area you wish to treat.
  4. Next, spread a thin layer of Silk’n Slider Gel over the area. Always apply Slider Gel (or another clear, water-based gel) before you put the device on your skin.
  5. Press the treatment surface firmly against your skin. You will feel a mild sensation of warmth. Move the device in gentle, massage-like linear motions on the area you wish to treat. Progress slowly and carefully. Work each treatment area for 5 to 10 minutes. Make sure the treatment surface is in good contact with your skin.
  6. Immediately after the treatment, wash your face to remove any gel, then apply facial lotion or a mask.

By following these treatment recommendations, your skin will feel immediately tighter after just one session. You can then expect to see visible results after five weeks and fuller results after 10 weeks.


* Results may vary based on skin type and degree of laxity in skin.



Model name Facetite Z
Treatment area 468 ± 5mm²
Technology HT
Red light (wavelength;
Optical output power)
630nm ± 20nm; 45 ± 9mW/cm²
IR (wavelength;
Optical output power)
850nm ± 20nm; 57 ± 11mW/cm²
RF (wavelength;
Optical output power)
1MHz ± 30%; 12W max
Operation & Safety Heat Stabilizer preventing skin overheating
Time from minimum
storage temperature between uses to minimum operating temperature with ambient temperature of 20℃
30 minutes
Time from maximum
storage temperature between uses to maximum operating temperature with ambient temperature of 20℃
30 minutes
Transport & Storage
between uses and storage condition
Temperature: -40 to 70℃
Relative humidity: 10% – 90%
Atmospheric pressure: 500-1060hPa
Operating conditions Temperature: 10 to 35℃
Relative humidity: 30% – 75%
Atmospheric pressure: 700-1060hPa
Adapter Rating: Input: 100-240VAC, 50-60Hz, 0.5A
Output: 12V, 1.5A
The device was tested and complies with IEC 60601-1 (Safety)
IEC 60601-2-2 (High Frequency)
IEC 60601-1-2 (EMC)
IEC 60601-1-11 (Environment)
IEC 60601-2-57 (Safety of non-laser source)
Package contents 1x Facetite Z device, 1x slider gel, 1x adapter, 1x user manual, 1x warranty booklet
Warranty 2 years
用户评价 (0)



成为第一个“New Silk’n FaceTite Z Version 3.0 三源塑顏射頻機 Z(連一支專用凝膠)” 的评价者