|尺寸||32.7 × 20.8 × 8.2 cm|S$638
全新Silk’n Infinity2.0 宅光家用永久脱毛机， 首部结合唤肤及脱毛波长家用美容机。
利用专利eHPL技术，专利微电流(Galvanic Energy)技術 (US20150126980A1), 能经脱毛机灯头旁的电极片传达微电流能量, 打开毛孔。使宅光能更有效直达毛囊, 破坏毛根。1-3档宅光脱毛能量，I-II档脸部唤肤能量，两种模式，一键操控！50万次闪光, 适合任何肤色！
由於配備蓝光清洁盒,与家人共享您的设备從此再不会存在问题! 只需将脱毛设备放入清洁盒中, 只需 6 至 7 分钟即可彻底消毒。秘密在于清洁盒的蓝光, 这是众所周知的抗菌消毒作用。细菌细胞吸收这种蓝光而死亡。消毒后, 脱毛设备卫生清洁, 安全可靠。
|尺寸||32.7 × 20.8 × 8.2 cm|
Silk’n hair removal devices are based on HPL™ (Home Pulsed Light) technology, which is a proprietary and patented technology we use to give you lasting hair removal results.
HPL™ is safe and effective for long-term hair removal because it uses optical light energy.
A quartz bulb delivers the optical light pulse, which is directed into the skin. The light energy is absorbed by the pigment in the hair shaft and is transformed into heat. This heat destroys the hair so it won’t grow back, while leaving the surrounding skin unaffected. The result is an effective, and virtually painless, treatment.
With the Infinity, we’ve improved on this technology by adding the power of galvanic energy for an even more powerful treatment, destroying deeply rooted, stubborn hair and stimulating your skin, leaving it soft and supple.
Galvanic energy is delivered through an electrode plate located at the rear of the Infinity device, near the treatment area. When the electrode touches the skin, the skin pores open, allowing optical energy to reach deeply to the root of the hair follicle, giving it access to even the most coarse, stubborn hairs. This energy also stimulates your skin to improve circulation and tone, while allowing for optimal absorption of post-treatment lotion — perfect for those who struggle with dry, irritated skin.
After every treatment, the number of hairs is reduced, resulting in beautiful, smooth results for life.
The Silk’n Infinity is designed to facilitate the long-term reduction of hair growth. This means, with regular use as directed, you can expect to see fewer and fewer unwanted hairs grow back, ultimately leading to hair-free skin for life.
The Silk’n hair removal device is safe and effective for women and men. It is designed for use on the face (cheekbones down), legs, arms, underarms, bikini lines, and other areas of the body where unwanted hair grows.
Our patented HPL technology is best suited for lighter skin tones and darker hair. Our built-in skin color sensor prevents the device from turning on if the skin tone is too dark to treat. That means if your skin is too dark for the level you’ve chosen, there’s an automatic failsafe built in to prevent any damage to your skin.
This beauty tool is ideal for use with lighter skin tones (I to V on the Fitzpatrick Skin Tone Classification Scale, see diagram) and brown-to black hair and may work on blonde, grey or red hair if there is enough pigment. With five available energy levels, you can choose the level you’re most comfortable with. We recommend starting at level one just until your body gets used to using this type of system.
Note: The galvanic treatment works to enlarge your pores for a better application of the treatment. If you do not make hand contact with the base electrode, no galvanic treatment circulation will be emitted.
A typical full hair growth cycle may take 18 to 24 months. During this time, multiple hair removal sessions will be required in order to achieve long-lasting hair removal.
The efficiency of hair removal varies from person to person according to body area, hair color and how the device is used.
Here’s what a typical hair removal plan should look like during a full hair growth cycle:
Treatments 1 to 4: Two weeks apart.
Treatments 5 to 7: Four weeks apart.
Treatments 8+: Treat as needed, until desired hair removal results are achieved.
The device has five levels of energy from 1 (the lowest) to 5 (the highest), represented by five energy level indicator lights. The energy level you use controls the intensity of the light pulse projected on your skin during hair removal treatments, from the lowest level to the highest level. As the energy level increases, so do hair removal results, as well as the risk of possible side effects and complications. Please read your product manual thoroughly to understand these potential impacts. Also remember to always start treatments at the lowest energy level and increase it gradually as your personal comfort allows.
When the device is turned on, the energy level is automatically set to level 1 automatically. Only one energy level indicator light will be on. To change the energy level, press the control button repeatedly to button again to reduce the energy level from 5 back to 1.
For best hair removal results, always begin your first use at the lowest energy setting.
Pulsing is the best technique for treating specific spots or small areas. It’s ideal for facial hair removal (such as upper lip hair removal), men’s back hair removal and treating other targeted areas of the body.
To pulse, press the treatment surface against your skin. Work in rows either across or down the treatment area. The treatment surface creates temporary pressure marks on the treated area so you can see areas you have treated. After each pulse, move the treatment surface to the next spot. Keep doing this pulsing action for the area you are treating.
Avoid gaps or overlaps as you use the device.
Gliding is the best technique for treating larger parts of the body. This technique is perfect for leg hair removal, under arm hair removal and treating large sections of the body.
To glide, press the treatment surface firmly against your skin and slowly glide over your skin (either across or down as shown in the image). Make sure that the treatment surface is always touching your skin.
At lower energy levels, the device takes only one to 1.5 seconds to recharge between pulses. This generates a nonstop sequence of flashes. Glide at a regular speed to ensure you avoid gaps or overlaps
|Model name||Infinity 2.0 with cleansing box|
|Spot size||0.9cm x 3cm (2.7 cm²)|
|Number of pulses||500K|
|Maximum energy level||Max 5J/cm²|
|Charging time/Power source||Continuous operation|
|Electrical requirement||100-240Vac, 2A|
|Operation & safety||skin colour sensor ensures use on appropriate skin types|
|Transport & Storage
between uses and storage condition
|Temperature: -40 to 70℃
Relative humidity: 10% – 90%
Atmospheric pressure: 500-1060hPa
|Operating conditions||Temperature: 10 to 35℃
Relative humidity: 30% – 75%
Atmospheric pressure: 700-1060hPa
|Adapter Rating||Input: 100-240VAC, 50-60Hz, 0.9A
Output: 12V, 3A
|Suitable for hair colour||Dark blonde, Light brown, Dark brown, Black|
|Treatment method||Touch & Glide|
|Intended use||Permanent hair reduction|
|Treatment areas||Legs, Arms, Bikini line, Underarms, Face|
|Package contents||1x Infinity 2.0 device, 1x cleansing box, 1x storage case, 1x cleaning cloth, 1x adapter, 1x user manual, 1x warranty booklet|
<p style=”text-align: center;”><strong><a href=”https://eurela.com/silkn/wp-content/uploads/2021/04/Infinity-Manual-For-Upload.pdf”>Click to download Infinity English Manual</a></strong></p>