Additional information
| Weight | 1.8 g |
|---|---|
| Dimensions | 30 × 31 × 8 cm |
The NowMiLab PIR – NIR All in one Whitening & Rejuvenation Pro Device – New Model!
$1,350.000
An Israel Technology Beauty Product! http://www.nowmi.sg
We present the latest model of NowMi Lab Whitening Device PRO. Keeping the multiple functions of “whitening, skin rejuvenation, brightening, and firming”, it has made new breakthroughs and more detailed adjustments in terms of use efficiency and convenience.
NowMi Lab PIR main core technology:
Near Infrared (NIR) technology, uses long wavelengths in the range of 900-1800nm. It only takes 20 seconds to reach the boiling point of 43°C collagen and it is able to effectively penetrate the deeper layers of the skin, namely the subcutaneous and muscle layers, brightening and rejuvenating the skin from its foundations.
“Superpulse Strobe” technology increases the frequency of light and the duration of NIR light. In terms of temperature control,
“Asynchronous Intelligent Phototherapy” technology is adopted: the average output energy per second in the first and second sections is milder. It allows the skin to adapt to the temperature of the device. While the average output energy per second in the third section is stronger and more stable.
．Three Treatment Modalities: high, medium and low.
．Three Detection Technology: Temperature, motion and contact detection which greatly improve safety and efficiency.
．Weekly Care: 1-2 sessions every week regularly, 20 minutes per session.
．Cost Effective Treatment: The treatment doesn’t require any gel and the user doesn’t need to wear goggles.
．Ideal for today’s busy lifestyle: Easy to carry and operate.
Tested by the authoritative laboratory Intertek:
After one session: Dark Spots were reduced by 8.66%, Brightening complexions increased by 10.43%, and collagen rejuvenation increased by 21.9%.
For 4 weeks: The skin texture looks smoother and the complexion appears brightened with a recovered freshness. Skin regains its youthful look and glow of radiance.
Additional information
How It Works
Skin rejuvenation
How It Works
Cordless Mode
No more hassle with cables and adaptors during your treatment? Try the Silk’n FaceTite Z Version3.0! The cordless function offers you much more freedom to move. This means you are no longer bound to one place and you can treat your face wherever and whenever you want. Watching TV, in bed or perhaps while you’re relaxing in the garden.
Skin rejuvenation
with HT™ technology
The effectiveness of HT™ technology has been researched in several clinical studies. In a blind independent review, before and one month after 20 fortnightly sessions, the results showed that 96% of participants had visibly fewer wrinkles, with no adverse side effects.
1. BEFORE: Damaged and weakened collagen and elastin fibres.
2. AFTER: Collagen and elastin fibres contract and the skin repairs itself from within.
-
Skin expert Debbie Thomas – 2:15
-
Before and after photos – 1:59
How to Use
How to Use
How to use your FaceTite Z Version 3.0
Silk’n FaceTite Z is easy to use. A treatment takes only a few minutes of your time. Be sure to follow our treatment play to get the best results.
New to using the Silk’n FaceTite? Here’s what we recommend.
Treatment schedule
- Treat each area separately for 5 to 10 minutes ( 10 to 15 minutes for corded FaceTite V2).
- You can treat as many areas as you like in one session; it’s up to you.
Maintenance regime
- To maintain your results, you should use FaceTite for two sessions a week for 10 weeks.
- After that, treat once every two weeks to maintain results.
Using the device
Follow the recommended order in the user guide and treat each zone for 5 to 10 mins by holding the device against your skin. It is important that you treat each area individually, one small area of your face at a time. By doing this, the temperature on your skin remains constant. Don’t forget to include your neck and jawline in the treatment.
Silk’n Slider Gel
Silk’n FaceTite comes with a tube of Silk’n Slider Gel. This gel is required to carry out your treatments. It is important that you apply a thin layer of gel to your skin before you start treatment.
Without the gel, the device will not work. The water-based product not only moisturizes but also helps to guide the device. It ensures that Silk’n FaceTite moves easily over your skin and prevents it from overheating and reddening.
You can consider to add on more Slider Gel to your shopping cart when you order the FaceTite.
Wrinkle and skin treatment areas
- Forehead (including in between brows)
- Right Cheek (including around eyes)
- Left Cheek (including around the eyes)
- Right Lower Cheek (including nasolabial fold, or, laugh lines around the mouth, and jawline)
- Left Lower Cheek (including nasolabial fold and jawline)
- Neck – Treat here for smoothing
Anti-aging treatment steps
- Remove all jewelry.
- Press the start button to turn on the device. The level 1 energy level indicator light will go on.
- For your first treatment, start at energy level 1 for a few minutes, then set an energy level that is comfortable for the area you wish to treat. For future treatments, you can use an energy level that is comfortable for the area you wish to treat.
- Next, spread a thin layer of Silk’n Slider Gel over the area. Always apply Slider Gel (or another clear, water-based gel) before you put the device on your skin.
- Press the treatment surface firmly against your skin. You will feel a mild sensation of warmth. Move the device in gentle, massage-like linear motions on the area you wish to treat. Progress slowly and carefully. Work each treatment area for 5 to 10 minutes. Make sure the treatment surface is in good contact with your skin.
- Immediately after the treatment, wash your face to remove any gel, then apply facial lotion or a mask.
By following these treatment recommendations, your skin will feel immediately tighter after just one session. You can then expect to see visible results after five weeks and fuller results after 10 weeks.
* Results may vary based on skin type and degree of laxity in skin.
Specification
Specification
| Model name | Facetite Z |
| Treatment area | 468 ± 5mm² |
| Technology | HT |
| Red light (wavelength; Optical output power) |
630nm ± 20nm; 45 ± 9mW/cm² |
| IR (wavelength; Optical output power) |
850nm ± 20nm; 57 ± 11mW/cm² |
| RF (wavelength; Optical output power) |
1MHz ± 30%; 12W max |
| Operation & Safety | Heat Stabilizer preventing skin overheating |
| Time from minimum storage temperature between uses to minimum operating temperature with ambient temperature of 20℃ |
30 minutes |
| Time from maximum storage temperature between uses to maximum operating temperature with ambient temperature of 20℃ |
30 minutes |
| Transport & Storage between uses and storage condition |
Temperature: -40 to 70℃ Relative humidity: 10% – 90% Atmospheric pressure: 500-1060hPa |
| Operating conditions | Temperature: 10 to 35℃ Relative humidity: 30% – 75% Atmospheric pressure: 700-1060hPa |
| Adapter Rating: | Input: 100-240VAC, 50-60Hz, 0.5A Output: 12V, 1.5A |
| The device was tested and complies with | IEC 60601-1 (Safety) IEC 60601-2-2 (High Frequency) IEC 60601-1-2 (EMC) IEC 60601-1-11 (Environment) IEC 60601-2-57 (Safety of non-laser source) |
| Package contents | 1x Facetite Z device, 1x slider gel, 1x adapter, 1x user manual, 1x warranty booklet |
| Warranty | 2 years |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.